Marshall High Capacity 2 Stage Gas Regulator, 2 x Pipes, Change Over Tap and Bracket Kit 

High Flow Dual Stage Gas Regulator, complete with 2 x 500mm copper pipe's with male POL (BBQ) fittings.

One manual change over valve, mounting bracket and fixing screws.

This kit is for Dual Domestic, bottle installations for Houses, Onsite vans and Cabins.

Enough gas flow to run Stove, Heater and Hot Water system.

Specifications:

• Manufacturer: Marshall Excelsior, USA
• Model No: LME-290-00HCMC
• Flow Rate: 290 Mj/hr
• Pressure: Inlet 1750 kpa Outlet 2.75 kpa
• For added safety there is a built in pressure relief device, which is set to 4.2 KPA
• 1/4" Inlet.
• 3/8" NPT Female Outlet.
• Copper Pipe (Pig Tail) 1/4"Inverted Flare & POL Male or (BBQ) or CGA 510.
• Adjustment range 9" - 13" WC
• Factory Set Outlet pressure 11" WC
• Test pressure ports are added to both regulators for testing and maintenance.
• Length: 190mm
• Width: 90mm
• Height: 75mm
• Pipe Length: 500mm

 Quality:

This regulator is designed and manufactured for high quality and performance, meeting the standards as specified by UL (Underwriters Laboratories).  

Made in the USA

Warranty 

This product is guaranteed and warranted free from manufactures defects in the material, workmanship or design for a period of 12 months from the date of purchase. Replacement of the sender unit must carried out in accordance with OEM specifications.  

If you have any doubts of the correct application of this part please feel free to email or call us prior to purchasing.   

Kit includes:

• 1 x 2 Stage Regulator
• 1 x Mounting Bracket
• 2 x Retaining Screws
• 2 x Mounting Screws
• 2 x 500mm Copper Pipe's
• 1 x Change Over Tap

WARNING

LPG is a compressed flammable liquid. Only licensed, trained and competent personal should conduct any operation or repairs relating to an LPG systems, LPG Component or LPG Storage Vessels.                               

Be aware of your surroundings as LPG vapour is flammable and must be kept away from all ignition sources such as pilot lights and piezo igniters in hot water systems, open flames, cigarettes, welding and grinding sparks and any other potential ignition source. Avoid direct contact with liquid LPG as a freeze burn may result.  One litre of liquid LPG expands to 270 litres of combustible vapour. Personal protective equipment must be worn when working with LPG.

Cylinders are designed to only fill to 80% of the water capacity to allow for expansion of the liquid with temperature changes.  This 80% level must not be exceeded when filling an LPG Cylinder. Ensure the LPG storage vessel(s) are in date and in good repair prior to filling.

Appliances intended to use vapour must not be supplied liquid LPG. Catastrophic failure may result.

Ensure all connections, seals, hoses and valves are clean, undamaged and in good repair prior to carrying out any operation.  All connection must be check for leaks with a non-corrosive leak detection fluid prior to operation.

Keep all LPG Storage Vessels out of reach of Children.

Improper installations and repairs could result in serious personal injury and property damage.