Ford Falcon BA, BF, FG Dedicated LPG Vialle Converter

  • $899.00

 (0 reviews)
  • Brand: Vialle
  • Product Code: 5973-3A
  • Availability: In Stock
  • Sku: 5973-3A
- +

Ford Falcon BA, BF, FG Dedicated LPG Vialle Converter

Please note : EXCLUDES COOLANT & GAS INLET FITTINGS 

This is brand new unused Vialle Factory Ford Straight Gas (LPG) Converter

Suits Ford Falcon Models:

  • BA, BF, FG

Convertor is complete and includes Idle Solenoid, Primer Solenoid, Lock Off Solenoid, Water fitting kit and Inlet brass fitting. 

Kits Includes:

  • 1 x Converter
  • 3 x Solenoids 

Approvals:

  • AGA Approval Number 5518
  • E4 67R-019301  
  • Manufactured by Vialle The Netherlands    

Stepper Motor and Base NOT Included

Tech Tip

Before replacing the Converter or Stepper Motor please read:

Stepper motors more often than not fail due to an internal Water/Coolant leak from the converter, it pays to check the condition of the converter first. One simply way of doing this is to check for coolant stains around the converter housing mainly where the gaskets are, if this is ok then find and slowly remove the bottom 2 drain bolts from the converter. If Water/Coolant or Oil drains out, then your converter will need attention such as reconditioning or Replacement. Your engines cooling system must be in good working order as a poorly maintain cooling system can also cause converter water gasket failures.

WARNING

LPG is a compressed flammable liquid. Only licensed, trained and competent personal should conduct any operation or repairs relating to an LPG systems, LPG Component or LPG Storage Vessels.                               

Be aware of your surroundings as LPG vapour is flammable and must be kept away from all ignition sources such as pilot lights and piezo igniters in hot water systems, open flames, cigarettes, welding and grinding sparks and any other potential ignition source. Avoid direct contact with liquid LPG as a freeze burn may result.  One litre of liquid LPG expands to 270 litres of combustible vapour. Personal protective equipment must be worn when working with LPG.

Cylinders are designed to only fill to 80% of the water capacity to allow for expansion of the liquid with temperature changes.  This 80% level must not be exceeded when filling an LPG Cylinder. Ensure the LPG storage vessel(s) are in date and in good repair prior to filling.

Appliances intended to use vapour must not be supplied liquid LPG. Catastrophic failure may result.

Ensure all connections, seals, hoses and valves are clean, undamaged and in good repair prior to carrying out any operation.  All connection must be check for leaks with a non-corrosive leak detection fluid prior to operation.

Keep all LPG Storage Vessels out of reach of Children.

Improper installations and repairs could result in serious personal injury and property damage.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Tags: Ford Falcon BA, BF, FG Dedicated LPG Vialle Converter, 5973-3A, Automotive

Related Products