Ford Falcon AU Dedicated LPG Vialle Reconditioned Converter
- Brand: Vialle
- Product Code: Vialle C/OAU
- Availability: Out Of Stock
- Sku: Vialle C/OAU
Ford Falcon AU Dedicated LPG Vialle Change over Reconditioned Converter
This is a used "Reconditioned" Vialle Factory Ford Straight Gas (LPG) Converter. The converter is completely disassembled, hot washed, sand blasted, cleaned and reassembled with new valves, seals, gaskets, seats, diaphragms and filter. After assembly the converter is bench tested with tests such as pressure tested, flow test and function test.
Please note this is a change over or exchange converter. We will send a pre-payed self address post bag with the reconditioned converter, and all you will need to do is drain all fluids from your old converter pop it into the bag supplied and return it to us by Australia post at no further cost to you.
IMPORTANT WARRANTY INFORMATION
THIS RECONDITIONED CONVERTER IS SUPPLIED WITH 12 MONTHS UNLIMITED KM WARRANTY.
YOU MUST RETURN YOUR OLD CONVERTER TO US AS A CONDITION OF SALE.
FAILURE TO HONOR THIS CONDITION AND RETURN YOUR OLD CONVERTER WILL VOID ALL WARRANTY AND SUPPORT
Your cooling system must be in good working order, poor or low coolant flow will cause the converter to Freeze and fail. Ensure your cooling system is in good working order as converter failure due to freezing is not covered under warranty.
Common cooling system problems that cause Converters to fail are Blocked heater core Thermostat in stuck open position or removed Blocked transmission cooler. Coolant leaks / Low coolant level,Water Pump, Insufficient coolant Flow.
Drain all coolant from your old converter and repackage in the original box and seal in the post satchel supplied.
When your new converter has been Installed notify us by
phone 1300 307 795
Or text 0408363743
we will then email you a prepaid return mailing Label.
Simply print the label, sign, attach to the satchel and drop converter at your nearest Australia post outlet.
Warranty is 12 months from sale date.
No warranty will be given if the converter freezes, which in turn will cause the water gasket to split, and if any contamination is present inside the converter.
Suits Ford Falcon Models:
- AU 1, 11, 111
Convertor is complete and includes Idle Solenoid, Primer Solenoid, Lock Off Solenoid, Water fitting kit and Inlet brass fitting.
- 1 x Converter
- 1 x Water Fitting kit with O'rings, retainer and bolt.
- 3 x Solenoids
- 1 x Inlet Brass Fitting
- AGA Approval Number 5518
- E4 67R-019301
- Converter originally manufactured by Vialle The Netherlands
Stepper Motor and Base NOT Included
No warranty will be given if the converter freezers, which in turn will cause the water gasket to split, and if any contamination is present inside the converter.
Before replacing the Converter or Stepper Motor please read
Stepper motors more often than not fail due to an internal Water/Coolant leak from the converter, it pays to check the condition of the converter first. One simply way of doing this is to check for coolant stains around the converter housing mainly where the gaskets are, if this is ok then find and slowly remove the bottom 2 drain bolts from the converter. If Water/Coolant or Oil drains out, then your converter will need attention such as reconditioning or Replacement. Your engines cooling system must be in good working order as a poorly maintain cooling system can also cause converter water gasket failures.
LPG is a compressed flammable liquid. Only licensed, trained and competent personal should conduct any operation or repairs relating to an LPG systems, LPG Component or LPG Storage Vessels.
Be aware of your surroundings as LPG vapour is flammable and must be kept away from all ignition sources such as pilot lights and piezo igniters in hot water systems, open flames, cigarettes, welding and grinding sparks and any other potential ignition source. Avoid direct contact with liquid LPG as a freeze burn may result. One litre of liquid LPG expands to 270 litres of combustible vapour. Personal protective equipment must be worn when working with LPG.
Cylinders are designed to only fill to 80% of the water capacity to allow for expansion of the liquid with temperature changes. This 80% level must not be exceeded when filling an LPG Cylinder. Ensure the LPG storage vessel(s) are in date and in good repair prior to filling.
Appliances intended to use vapour must not be supplied liquid LPG. Catastrophic failure may result.
Ensure all connections, seals, hoses and valves are clean, undamaged and in good repair prior to carrying out any operation. All connection must be check for leaks with a non-corrosive leak detection fluid prior to operation.
Keep all LPG Storage Vessels out of reach of Children.
Improper installations and repairs could result in serious personal injury and property damage.