Gore/Gastec LPG-CNG Fuel Porcessor to Suit Impco, LG Motor & Nolf LPG systems

  • $247.00

 (0 reviews)
  • Brand: Gastec
  • Product Code: IMPCO-6
  • Availability: In Stock
  • Sku: IMPCO-6
- +

Gore Research/Gastek LPG and CNG Fuel Processor 

This is a brand new genuine Gore/Gastek fuel processor. Which connects to the vehicles oxygen sensor and TPS sensor and thru the use of a 3 way popit valve the gas mixture is adjusted going into the motor to give you the best economy, and the best power at full throttle.

Please check first what the oxygen sensor voltage is at lean and rich as there are different processors available to suit most models. 


This processor is suitable for Oxygen Sensor with 0.0volts Lean to 0.9volts Rich


Installation is made easy by a compressive set of instructions.
Processor Specifications:
Length: 73mm
Width : 60mm
Height: 23mm
Power: 12volt
O2 emulation: 0.0 volts lean, 0.9 volts rich.

Quality:

Gastek parts are designed and manufactured in Australia for high quality and performance, meeting the standards as specified by the original engine and vehicle equipment manufacturers (OE) 


Warranty 


Gastek products are guaranteed and warranted free from manufactures defects in the material, workmanship or design for a period of 3 years on the processor from the date of purchase. The Popit valve is warranted for a period of 12months. Repairs must carried out in accordance with OEM specifications. 

  If you have any doubts of the correct application of this part please feel free to email or call us prior to purchasing.  

Cars this part will fit:

This processor is suitable as a replacement of your old processor or up grade from a another processor, or for new LPG or CNG conversions, which use and Impco, LG or Nolf converter and mixer system. Ie simple converters and complex mixers, or American style LPG system.


Kit includes:

1 x Processor and bracket for under dash

1 x Popit Valve

1 x wiring loom

2 x cable ties

2 x Terminals

1 x Brass vacuum elbow

1 x compliance sticker

1 x Set of instructions


WARNING;
LPG is a compressed flammable liquid. Only licensed, trained and competent personal should conduct any operation or repairs relating to an LPG systems, LPG Component or LPG Storage Vessels.                               

Be aware of your surroundings as LPG vapour is flammable and must be kept away from all ignition sources such as pilot lights and piezo igniters in hot water systems, open flames, cigarettes, welding and grinding sparks and any other potential ignition source. Avoid direct contact with liquid LPG as a freeze burn may result.  One litre of liquid LPG expands to 270 litres of combustible vapour. Personal protective equipment must be worn when working with LPG.

Cylinders are designed to only fill to 80% of the water capacity to allow for expansion of the liquid with temperature changes.  This 80% level must not be exceeded when filling an LPG Cylinder. Ensure the LPG storage vessel(s) are in date and in good repair prior to filling.

Appliances intended to use vapour must not be supplied liquid LPG. Catastrophic failure may result.

Ensure all connections, seals, hoses and valves are clean, undamaged and in good repair prior to carrying out any operation.  All connection must be check for leaks with a non-corrosive leak detection fluid prior to operation.

Keep all LPG Storage Vessels out of reach of Children.

Improper installations and repairs could result in serious personal injury and property damage.

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: Gore/Gastec LPG-CNG Fuel Porcessor to Suit Impco, LG Motor & Nolf LPG systems, IMP6, Electrical

Related Products